您当前的位置: 首页 > 产品介绍 > 收料设备 > 全自动收纸机
Position: Index > Product > Sheet Stacker > Sheet Stacker

全自动收纸机

Sheet Stacker




GSZ系列全自动收纸机,为GSP、GST系列全自动滚筒式丝网印刷机的配套设备之一,完成印刷成品或半成品收纸工作,可以极大地提高生产效率和质量。

整机可以分为进纸架机构、整纸机构和收纸台升降机构及电气控制系统等几部分。

1.进纸架机构由两部分构成,一是传送带部分,该部分采用变频调速,可以简便调节传送带速度,以控制纸张传送快慢,从而适应不同的印刷速度。另外一部分是吹气装置,当纸张从传送带脱离后,气流从吹气管吹出,把纸张托起使之继续向前运动一段距离,纸张下落到收纸台板上。

2.整纸部分采用气动式齐纸机构。气动式结构工作噪音小,动作稳定可靠,调节气缸位置方便可调,以适合不同大小的纸张或印刷品。

3.收纸台升降由电磁刹车电机和四根同步运动链条传动,可以准确地停止在所要求的高度,并同时保证收纸台的水平。

4.电气控制部分采用进口施耐德电器原件;


GSZ services Sheet Stacker is accessorial equipment to automatic cylinder screen printing machine. It is used to collect and pile paper which can improve your product efficiency.

This machine is made up of input-bracket mechanism, pushing-paper mechanism, piling-board up-down mechanism and electric control system.

1.Input-bracket mechanism contains conveying belts and blowing device. The conveying belts are drove by motor, which speed is adjusted by transducer. The blowing device is used to blow-up the paper to move a distance after the paper leave from the belt. The paper will continue to go ahead by the airflow. Then the blowing is shut off, the paper drop down to the piling-board.

2.The pushing mechanism is drove by pneumatic cylinder. The position of the cylinder is adjusted easily, so as to suit for to different size paper.

Note: the air compressor is not provided; the cylinder working air pressure is 0.4MPa.

3.Piling-board up-down mechanism is drove by four synchro chains from electromagnetic motor. The board can be stopped accurately with a certain level;

4.Electric control system is controlled by PLC. The system is convenient and safety.


技术参数

Technical Parameters

型号 Model GSZ-1020
最大收纸尺寸(mm) Max. Paper Size(mm) 1020x740
最小收纸尺寸(mm) Min. Paper Size(mm) 560x350
最大收纸高度度(mm) Max. Height(mm) 600
总功率(kw) Total Power(kw) 1.0
总重量(kg) Total Weight(kg) 800
外型尺寸(mm) Exterior Dimension(mm) 2100x1900x1200
Copyright(c)2015-2020 上海耕驰印刷机械有限公司
沪ICP备20001669号
Copyright(c)2015-2020 Shanghai KetchView Printing Machinery CO.LTD